home.md

@@ -83,11 +83,13 @@
 |  |    |   |   | [2] - IG active. 1 when IG or Ready state |
 |  |    |   |   | [1] - Shutting down? Sometimes flashes when "Ready" or "IG" switching to "OFF" |
 |  |    |   |   | [6],[5],[4],[0] - Zeros, unknown |
-| 0xB8 | ?? ?? ff ?? ?? ??   | ff  |   | Status, bits  |
-|  |    |   |   | [7] - "Ready" state |
-|  |    |   |   | [3] - Brakes pedal pressed |
-|  |    |   |   | [2..0] Battery charge level. 0 - low, 7 - max|
-|  |    |   |   | [6],[5],[4] - Zeros, unknown |
+| 0xB8 | ff ff ff ff ff ??   | ff  |   | Status, bits  |
+|  |    |   |   | [0:3] - P not set but driver's door open |
+|  |    |   |   | [1:0] - Problem - Inspection mode |
+|  |    |   |   | [2:7] - "Ready" state |
+|  |    |   |   | [2:3] - Brakes pedal pressed |
+|  |    |   |   | [2:2..2:0] Battery charge level. 0 - low, 7 - max|
+|  |    |   |   | [2:6],[2:5],[2:4] - Zeros, unknown |
 | 0xB9 | ff ff 00  | ff  |   | Energy direction status. Bits, gropped by 3. Looks like overhead protocol. Bit n - reverse, n+1 - forward, n+2 - active at all. So, 4ex, 101 means energy from Batt to MG1. 011 - from MG1 to Batt. Other values never saw.  |
 |  |    |   |   | [15..13] - "011"="MG2 -> Whells"  011 - reverse |
 |  |    |   |   | [12..10] - "011"="Batt -> MG's"  011 - reverse |
@@ -101,4 +103,4 @@
 // RAW !!
 
 [G/W] 6:[ E4 31 B6 80 00 00] - Shift pos ? 80 - P, 10- D, 20-R 40-N ???? 
-[G/W -> EMV(Head)] 5:[ 00 E0 5D F7 3B] - Outside temp, F ??
+[G/W -> EMV(Head)] 5:[ 00 E0 5D F7 3B] - Outside temp, *C+0x30 ??